The following sections of this BookRags Literature Study Guide is offprint from Gale's For Students Series: Presenting Analysis, Context, and Criticism on Commonly Studied Works: Introduction, Author Biography, Plot Summary, Characters, Themes, Style, Historical Context, Critical Overview, Criticism and Critical Essays, Media Adaptations, Topics for Further Study, Compare & Contrast, What Do I Read Next?, For Further Study, and Sources.
(c)1998-2002; (c)2002 by Gale. Gale is an imprint of The Gale Group, Inc., a division of Thomson Learning, Inc. Gale and Design and Thomson Learning are trademarks used herein under license.
The following sections, if they exist, are offprint from Beacham's Encyclopedia of Popular Fiction: "Social Concerns", "Thematic Overview", "Techniques", "Literary Precedents", "Key Questions", "Related Titles", "Adaptations", "Related Web Sites". (c)1994-2005, by Walton Beacham.
The following sections, if they exist, are offprint from Beacham's Guide to Literature for Young Adults: "About the Author", "Overview", "Setting", "Literary Qualities", "Social Sensitivity", "Topics for Discussion", "Ideas for Reports and Papers". (c)1994-2005, by Walton Beacham.
All other sections in this Literature Study Guide are owned and copyrighted by BookRags, Inc.
According to the second law of thermodynamics, all Carnot engines operated between two given temperatures will have the same efficiency. A Carnot cycle, then, is any reversible cycle having two adiabatic (no heat added) transitions and two isothermal (no temperature change) transitions. If we assume that an engine works between two temperatures that differ greatly and that our working substance can undergo a phase change, then the slope of the equilibrium lines in a pressure-temperature diagram is the Clausius-Clapeyron equation.
Examining the Carnot cycle, we can get a clearer understanding of the above assertion. The engine contains a liquid and vapor (such as water and steam) in equilibrium at temperature (T) and pressure (p). The specific volume of the liquid is V and the specific volume of the vapor is V. The first stage (from a to b in the figure below) is to undergo an isothermal expansion at temperature (T) and pressure (p) until a mass (m) has vaporized. The heat, Q, absorbed by the system in this step is the product of the mass converted and the latent heat of vaporization of the mass:
Q = mL
In the next stage (from b to c), the system expands adiabatically, i.e., it absorbs no heat, until the cylinder is at a new temperature, T and new pressure p. An isothermal compression is carried out in the third stage, maintaining T and p. The final stage in another adiabatic process to bring the system back to point a at temperature (T) and pressure (p).
Knowing that the efficiency of such an engine is:
and assuming the volume changes during the adiabatic processes are small (and so can be neglected), then
Substituting for work and solving for the ratio of the change in pressure and temp, we find:
Now, if make the assumption that the volume on the vapor is much greater that the volume of the liquid, and that it behaves as an ideal gas, this reduces to:
Knowing that L = H and
the equation becomes:
An integration over p gives us
which is the Clausius-Clapeyron equation. Comparing this equation to y=mx+b, the equation for a straight line, we see that y corresponds to ln (p) and x corresponds to 1/T. Thus, the term H/nR must be the slope of the line. Using these facts, we can glean a variety of data from the equation; we can calculate H just given a pressure and two temperatures and so forth.