BookRags.com Literature Guides Literature
Guides
Criticism & Essays Criticism &
Essays
Questions & Answers Questions &
Answers
Lesson Plans Lesson
Plans
My Bibliography Periodic Table U.S. Presidents Shakespeare Sonnet Shake-Up
Research Anything:        
History | Encyclopedias | Films | News | Create a Bibliography | More... Login | Register | Help
Not What You Meant?  There are 17 definitions for Ideal.

Ideal gas law

Print-Friendly
About 4 pages (1,109 words)
Ideal gas law Summary

Bookmark and Share Questions on this topic? Just ask!

The ideal gas law is the equation of state of a hypothetical ideal gas, first stated by Benoît Paul Émile Clapeyron in 1834.

The state of an amount of gas is determined by its pressure, volume, and temperature according to the equation:
<math>\ pV = nRT </math>

where

<math>\ p </math> is the absolute pressure,
<math>\ V </math> is the volume of the vessel,
<math>\ n </math> is the amount of substance of gas,
<math>\ R </math> is the ideal gas constant,
<math>\ T </math> is the absolute temperature.

The appropriate value of the ideal gas constant (R) depends on the units being used. In SI units, R = 8.314 472 J mol-1 K-1 (or equivalently m3 Pa K−1 mol−1). Other useful values for R are:

R = 0.08205784 L atm K-1 mol-1
R = 62.3637 L mmHg K-1 mol-1
R = 10.7316 ft3 psi °R-1 lb-mol-1

The ideal gas law mathematically follows from a statistical mechanical treatment of primitive identical particles (point particles without internal structure) which do not interact, but exchange momentum (and hence kinetic energy) in elastic collisions. Since it neglects both molecular size and intermolecular attractions, the ideal gas law is most accurate for monoatomic gases at high temperatures and low pressures. Obviously the neglect of molecular size becomes less important for larger volumes, i.e., for lower pressures. The relative importance of intermolecular attractions diminishes with increasing thermal kinetic energy i.e., with increasing temperatures. More sophisticated equations of state, such as the van der Waals equation, allow deviations from ideality caused by molecular size and intermolecular forces to be taken into account.

Contents

Alternative forms

As the amount of substance could be given in mass instead of moles, sometimes an alternative form of the ideal gas law is useful. The number of moles (<math>n\, </math>) is equal to the mass (<math>\, m </math>) divided by the molar mass (<math>\, M </math>):

<math> n = {\frac{m}{M}} </math>

Then, replacing <math>\, n </math> gives:

<math>\ pV = \frac{m}{M}RT </math>

from where

<math>\ p = \rho \frac{R}{M}T </math>.

This form of the ideal gas law is particularly useful because it links pressure, density <math> \rho = m/V</math>, and temperature in a unique formula independent from the quantity of the considered gas.

In statistical mechanics the following molecular equation is derived from first principles:

<math>\ pV = NkT .</math>

Here <math>\,k</math> is Boltzmann's constant, and <math>\,N</math> is the actual number of molecules, in contrast to the other formulation, which uses <math>\,n</math>, the number of moles. This relation implies that <math>N\,k = nR</math>, and the consistency of this result with experiment is a good check on the principles of statistical mechanics. From here we can notice that for an average particle mass of <math> \mu </math> times the atomic mass constant <math>m_\mathrm{u}</math> (i.e., the mass is <math>\mu</math> u)

<math> N = \frac{m}{\mu m_\mathrm{u}} </math>

and since <math> \rho = m/V </math>, we find that the ideal gas law can be re-written as:

<math> p = \frac{1}{V}\frac{m}{\mu m_\mathrm{u}} kT = \frac{k}{\mu m_\mathrm{u}} \rho T .</math>

Derivations

Empirical

The ideal gas law can be derived from combining two empirical gas laws: the combined gas law and Avogadro's law. The combined gas law states that

<math>\frac {pV}{T}= C </math>

where C is a constant which is directly proportional to the amount of gas, n (Avogadro's law). The proportionality factor is the universal gas constant, R, i.e. <math>C=nR</math>. Hence the ideal gas law

<math> pV = nRT \,</math>

Theoretical

The ideal gas law can also be derived from first principles using the kinetic theory of gases, in which several simplifying assumptions are made, chief among which are that the molecules, or atoms, of the gas are point masses, possessing mass but no significant volume, and undergo only elastic collisions with each other and the sides of the container in which both linear momentum and kinetic energy are conserved.

Derivation from the statistical mechanics

Let q = (qx, qy, qz) and p = (px, py, pz) denote the position vector and momentum vector of a particle of an ideal gas,respectively, and let F denote the net force on that particle, then

<math>

\begin{align} \langle \mathbf{q} \cdot \mathbf{F} \rangle &= \Bigl\langle q_{x} \frac{dp_{x}}{dt} \Bigr\rangle + \Bigl\langle q_{y} \frac{dp_{y}}{dt} \Bigr\rangle + \Bigl\langle q_{z} \frac{dp_{z}}{dt} \Bigr\rangle\\ &=-\Bigl\langle q_{x} \frac{\partial H}{\partial q_x} \Bigr\rangle - \Bigl\langle q_{y} \frac{\partial H}{\partial q_y} \Bigr\rangle - \Bigl\langle q_{z} \frac{\partial H}{\partial q_z} \Bigr\rangle = -3k_{B} T, \end{align} </math> where the first equality is Newton's second law, and the second line uses Hamilton's equations and the equipartition theorem. Summing over a system of N particles yields

<math>

3Nk_{B} T = - \biggl\langle \sum_{k=1}^{N} \mathbf{q}_{k} \cdot \mathbf{F}_{k} \biggr\rangle. </math>

By Newton's third law and the ideal gas assumption, the net force on the system is the force applied by the walls of their container, and this force is given by the pressure P of the gas. Hence

<math>

-\biggl\langle\sum_{k=1}^{N} \mathbf{q}_{k} \cdot \mathbf{F}_{k}\biggr\rangle = P \oint_{\mathrm{surface}} \mathbf{q} \cdot \mathbf{dS}, </math> where dS is the infinitesimal area element along the walls of the container. Since the divergence of the position vector q is

<math>

\boldsymbol\nabla \cdot \mathbf{q} = \frac{\partial q_{x}}{\partial q_{x}} + \frac{\partial q_{y}}{\partial q_{y}} + \frac{\partial q_{z}}{\partial q_{z}} = 3, </math> the divergence theorem implies that

<math>

P \oint_{\mathrm{surface}} \mathbf{q} \cdot \mathbf{dS} = P \int_{\mathrm{volume}} \left( \boldsymbol\nabla \cdot \mathbf{q} \right) dV = 3PV, </math> where dV is an infinitesimal volume within the container and V is the total volume of the container. Putting these equalities together yields

<math>

3Nk_{B} T = -\biggl\langle \sum_{k=1}^{N} \mathbf{q}_{k} \cdot \mathbf{F}_{k} \biggr\rangle = 3PV, </math> which immediately implies the ideal gas law for N particles:

<math>

PV = Nk_{B} T = nRT,\, </math> where n=N/NA is the number of moles of gas and R=NAkB is the gas constant.

See also

References

View More Summaries on Ideal gas law
More Information
  • View Ideal gas law Study Pack
  • 17 Alternative Definitions
  • Search Results for "Ideal gas law"
  • Add This to Your Bibliography
  • More Products on This Subject
    Ideal Gas Law
    The relationship between three state variables, absolute pressure (P), volume (V), and absolute temperature (T), that is deduced from kinetic theory and characterizes an ideal gas is called the ideal gas law, PV = nRT, where P is absolute pressure, V is... more


     
    Ask any question on Ideal gas law and get it answered FAST!
    Answer questions in BookRags Q&A and earn points toward
    discounted or even FREE Study Guides and other BookRags products!
    Learn more about BookRags Q&A
    Copyrights
    Ideal gas law from Wíkipedia. ©2006 by Wíkipedia. Licensed under the GNU Free Documentation License. View a list of authors or edit this article.

    Article Navigation
    Join BookRagslearn moreJoin BookRags




    About BookRags | Customer Service | Report an Error | Terms of Use | Privacy Policy