| Desorption electrospray ionization | |
|---|---|
| Acronym | DESI |
| Classification | Mass spectrometry |
| Analytes | Organic molecules Biomolecules |
| Other Techniques | |
| Related | Electrospray ionization Atmospheric pressure chemical ionization |
Desorption electrospray ionization (DESI) is a method for creating ions that can be used in mass spectrometry for chemical analysis. In DESI, an electrospray source creates charged droplets that are directed at a solid sample a few millimeters to a few centimeters away. The charged droplets pick up the sample through interaction with the surface and then form highly charged ions that can be sampled into a mass spectrometer.[1]
Contents |
Related techniques
Several variations of desorption electrospray have been reported.[2]
Chemical ionization
- See also: chemical ionization
Desorption atmospheric pressure chemical ionization (DAPCI) uses a flow of solvent vapor and a corona discharge to affect ionization.[3] With atmospheric solids analysis probe (ASAP), a jet of heated gas is directed at the sample surface and the desorbed species are ionized by corona discharge.[4]
Glow discharge
The direct analysis in real-time (DART) ion source uses a glow discharge to create the primary ions that are then directed against the sample surface.[5]
Sonic spray
Desorption sonic spray ionization (DeSSI)[6] uses sonic spray ionization[7] to form the ions that are directed at the sample surface.
Laser assisted
Electrospray-assisted laser desorption/ionization (ELDI) relies on a laser to the desorption of material into the electrospray plume.[8] With matrix-assisted laser desorption electrospray ionization (MALDESI), a nitrogen laser is used to desorb material into the electrospray.[9] MALDESI has been used with MALDI matrix materials. Laser ablation electrospray ionization (LAESI) uses an infrared laser for ablation of the sample material.[10] Desorption atmospheric pressure photoionization (DAPPI) is not an electrospray technique, but uses a jet of heated solvent for desorption and ultraviolet light for photoionization.[11]
References
- ^ Takáts Z, Wiseman JM, Cooks RG (2005). "Ambient mass spectrometry using desorption electrospray ionization (DESI): instrumentation, mechanisms and applications in forensics, chemistry, and biology". Journal of mass spectrometry : JMS 40 (10): 1261-75. doi:10.1002/jms.922. PMID 16237663.
- ^ Cooks RG, Ouyang Z, Takats Z, Wiseman JM (2006). "Detection Technologies. Ambient mass spectrometry". Science 311 (5767): 1566-70. doi:10.1126/science.1119426. PMID 16543450.
- ^ Takáts Z, Cotte-Rodriguez I, Talaty N, Chen H, Cooks RG (2005). "Direct, trace level detection of explosives on ambient surfaces by desorption electrospray ionization mass spectrometry". Chem. Commun. (Camb.) (15): 1950–2. doi:10.1039/b418697d. PMID 15834468.
- ^ McEwen CN, McKay RG, Larsen BS (2005). "Analysis of solids, liquids, and biological tissues using solids probe introduction at atmospheric pressure on commercial LC/MS instruments". Anal. Chem. 77 (23): 7826–31. doi:10.1021/ac051470k. PMID 16316194.
- ^ Cody RB, Laramée JA, Durst HD (2005). "Versatile new ion source for the analysis of materials in open air under ambient conditions". Anal. Chem. 77 (8): 2297–302. doi:10.1021/ac050162j. PMID 15828760.
- ^ Haddad R, Sparrapan R, Eberlin MN (2006). "Desorption sonic spray ionization for (high) voltage-free ambient mass spectrometry". Rapid Commun. Mass Spectrom. 20 (19): 2901–5. doi:10.1002/rcm.2680. PMID 16941547.
- ^ Hirabayashi A, Sakairi M, Koizumi H (1995). "Sonic spray mass spectrometry". Anal. Chem. 67 (17): 2878–82. PMID 8779414.
- ^ Shiea J, Huang MZ, Hsu HJ, Lee CY, Yuan CH, Beech I, Sunner J (2005). "Electrospray-assisted laser desorption/ionization mass spectrometry for direct ambient analysis of solids". Rapid Commun. Mass Spectrom. 19 (24): 3701-4. doi:10.1002/rcm.2243. PMID 16299699.
- ^ Sampson JS, Hawkridge AM, Muddiman DC (2006). "Generation and detection of multiply-charged peptides and proteins by matrix-assisted laser desorption electrospray ionization (MALDESI) Fourier transform ion cyclotron resonance mass spectrometry". J. Am. Soc. Mass Spectrom. 17 (12): 1712-6. doi:10.1016/j.jasms.2006.08.003. PMID 16952462.
- ^ Nemes P, Vertes A (2007). "Laser Ablation Electrospray Ionization for Atmospheric Pressure, in Vivo, and Imaging Mass Spectrometry". doi:10.1021/ac071181r. PMID 17900146.
- ^ Haapala M, Pól J, Saarela V, et al (2007). "Desorption Atmospheric Pressure Photoionization" 79 (20): 7867–7872. doi:10.1021/ac071152g. PMID 17803282.
External links
- Purdue Aston Lab - DESI
- Prosolia, Inc. - Manufacturer of DESI sources
- Method and System for Desorption Electrospray Ionization - U.S. Patent Application 20050230635
- Method and System for Desorption Electrospray Ionization - WO patent 2005094389
- Ionization by droplet impact - U.S. Patent Application 20060108539
