In electronics, a C battery is any battery used to provide bias to the control grid of a vacuum tube. Until the early 1930s this was common practice in valve (tube) radio sets but was largely superseded by grid leak resistors or voltage divider biasing. Grid bias batteries are still manufactured today, but not for radio use. They are popular in schools and colleges as a convenient variable voltage source in science classes. The most popular battery is the 9 volt type with taps every 1½ volts that accept a banana plug. The alphabetic designation of these batteries is derived from the historic identification of the elements of the vacuum tube. Initially, the only such device was a diode with only a plate and cathode. Following the direction of electron flow, these electrodes were identified as "A" and "B" for the cathode and anode (plate), respectively. Later, when the control grid element was added to create the triode tube, it was logically assigned the letter "C."
"C" battery
L 4" W 1.25" H 3" ca. 1942
See also
External links
- Instructions for Operating The Crosley 51 Radio Receiver Examples of usage of A, B, and C batteries in an early radio.
