The following sections of this BookRags Literature Study Guide is offprint from Gale's For Students Series: Presenting Analysis, Context, and Criticism on Commonly Studied Works: Introduction, Author Biography, Plot Summary, Characters, Themes, Style, Historical Context, Critical Overview, Criticism and Critical Essays, Media Adaptations, Topics for Further Study, Compare & Contrast, What Do I Read Next?, For Further Study, and Sources.
(c)1998-2002; (c)2002 by Gale. Gale is an imprint of The Gale Group, Inc., a division of Thomson Learning, Inc. Gale and Design and Thomson Learning are trademarks used herein under license.
The following sections, if they exist, are offprint from Beacham's Encyclopedia of Popular Fiction: "Social Concerns", "Thematic Overview", "Techniques", "Literary Precedents", "Key Questions", "Related Titles", "Adaptations", "Related Web Sites". (c)1994-2005, by Walton Beacham.
The following sections, if they exist, are offprint from Beacham's Guide to Literature for Young Adults: "About the Author", "Overview", "Setting", "Literary Qualities", "Social Sensitivity", "Topics for Discussion", "Ideas for Reports and Papers". (c)1994-2005, by Walton Beacham.
All other sections in this Literature Study Guide are owned and copyrighted by BookRags, Inc.
A method for removing sulfur dioxide from combustion stack gas. A slurry of finely ground alkaline material such as calcium carbonate is sprayed into the effluent gases before it enters the smokestack. The material reacts chemically with sulfur dioxide to produce a non-hazardous solid product, such as calcium sulfate, that can then be collected by filters or other mechanical means. The technique is called dry injection because the amount of water in the slurry is adjusted so that all moisture evaporates while the chemical reactions are taking place and a dry precipitate results. The use of dry alkali injection can result in a 90% reduction in the emission of sulfur dioxide from a stack. It is more expensive than wet alkali injection or simply adding crushed limestone to the fuel, but it is more effective than these techniques and results in a waste product that is relatively easy to dispose of.