On the Economy of Machinery and Manufactures eBook

This eBook from the Gutenberg Project consists of approximately 358 pages of information about On the Economy of Machinery and Manufactures.

On the Economy of Machinery and Manufactures eBook

This eBook from the Gutenberg Project consists of approximately 358 pages of information about On the Economy of Machinery and Manufactures.

351.  The most portable form in which power can be condensed is, perhaps, by the liquefaction of the gases.  It is known that, under considerable pressure, several of these become liquid at ordinary temperatures; carbonic acid, for example, is reduced to a liquid state by a pressure of sixty atmospheres.  One of the advantages attending the use of these fluids, would be that the pressure exerted by them would remain constant until the last drop of liquid had assumed the form of gas.  If either of the elements of common air should be found to be capable of reduction to a liquid state before it unites into a corrosive fluid with the other ingredient, then we shall possess a ready means of conveying power in any quantity and to any distance.  Hydrogen probably will require the strongest compressing force to render it liquid, and may, therefore, possibly be applied where still greater condensation of power is wanted.  In all these cases the condensed gases may be looked upon as springs of enormous force, which have been wound up by the exertion of power, and which will deliver the whole of it back again when required.  These springs of nature differ in some respects from the steel springs formed by our art; for in the compression of the natural springs a vast quantity of latent heat is forced out, and in their return to the state of gas an equal quantity is absorbed.  May not this very property be employed with advantage in their application?

Part of the mechanical difficulty to be overcome in constructing apparatus connected with liquefied gases, will consist in the structure of the valves and packing necessary to retain the fluids under the great pressure to which they must be submitted.  The effect of heat on these gases has not yet been sufficiently tried, to lead us to any very precise notions of the additional power which its application to them will supply.

The elasticity of air is sometimes employed as a spring, instead of steel:  in one of the large printing-machines in London the momentum of a considerable mass of matter is destroyed by making it condense the air included in a cylinder, by means of a piston against which it impinges.

352.  The effect of competition in cheapening articles of manufacture sometimes operates in rendering them less durable.  When such articles are conveyed to a distance for consumption, if they are broken, it often happens, from the price of labour being higher where they are used than where they were made, that it is more expensive to mend the old article, than to purchase a new.  Such is usually the case, in great cities, with some of the commoner locks, with hinges, and with a variety of articles of hardware.

Notes

1.  The amount of obstructions arising from the casual fixing of trees in the bottom of the river, may be estimated from the proportion of steamboats destroyed by running upon them, The subjoined statement is taken from the American Almanack for 1832: 

Copyrights
Project Gutenberg
On the Economy of Machinery and Manufactures from Project Gutenberg. Public domain.